Servo-assisted reel-change system.

Micro-perforation device for the tubular film in order to eliminate air from the inside of the bag

Printing of alphanumeric characters on one or both sides of the tubular film.

45-degree seal for bottom corners and tops of gusseted bags.

Probe deaeration unit to minimize the volume of fluidized products.

Device to clean the upper bag edges when working with dusty products.

Possibility of handling reels with a preformed handle.

Device to add inert gas to the bag before the bag mouth is closed.

Painting of the structure with a cycle to meet the needs imposed by the products to be handled.

Construction of the entire machine in stainless steel.

Base for moving the machine (in manual or motorized), in order to use it with several outlets (silos) and work with products that have different characteristics.

Device to reopen and clean the upper bag edges for products that could impede sealing.

Gusseting device to make a gusseted bag from flat tubular film.

IP 65 protection

Dust-proofing cushions on the bag-holder.

Device for sealing a strip over the bag mouth.

Possibility of making the handle during the bag-forming phase.